The Control Panel

[chaz6422]

ty i got the gree light, yellow light, n orang light. but i'm stuck on the blue n red ones

[Guest]

Colors:

Undo the four screws in the corners of the red panel. Click the red panel to lift it out of place. Inside there are 3 little color thingies, click them. Close the panel. Click each of the color thingies so that they move next to the screen.

Next is trial and error to match the colors by moving the sliders, I don't remember what numbers I got for the RGB values on each one.

Wiring:

I did this by following the way the power seems to work on the lights. The left lead of the light needs to be connected to positive, the left to negative. Then you need to hook them up in sequence. For example, I started with connecting the positive battery terminal to the left lead on the first light, bottom row, second pin. Then from the right lead on the first light (top row, fourth pin) to the left lead of the third light (bottom row, first pin) and so on.

I'm not an electrician, so forgive me if I messed up my explanation

[Guest]

I'm at the part with the three locks and the happy little tune. Now I's stuck.

[trinity_enigma]

stuck on the locks too- haven't a clue what to do

[trinity_enigma]

well don't click on the hinges coz then you press the button and blow earth up

[raydn1]

about the wiring....

one cable is missing, with that method above only 4 lights turn on !?

[Guest]

Oops.. wiring:

Return to the color box, open it and grab the blue cable. That will give you enough wires.

[RWW]

well don't click on the hinges coz then you press the button and blow earth up

I decompiled the .swf just to be sure, and removing the hinges and blowing up the earth is the only ending.

[chaz6422]

i still don't get the lights thing... you can only light one at a time.

[blo]

I dont get the colour thing.. i have the orange... but not the green and purple.. Does anybody know what numbers i have to have on RGB to get the purple and green??

[raydn1]

try to download a "colorpicker" (search with google)

it will tell you the exact rgb code for each color the mouse pointer is over...

[Unregistered 34]

blue cables

put all blue in any point , when the box of the blue cbles is empty click and u will se a little numbers,zoom in to see the numbers and put in the panel then press enter and u will see the circuit to connect the blue cables to the led`s

sorry my english bye

pd: number isnide the box is 37759121

[marla]

now what?

got all the lights on, listened to the tune played...got 3 locks there in the middle..purple, yellow n orange
now what?

[guest]

Wiring:

I did this by following the way the power seems to work on the lights. The left lead of the light needs to be connected to positive, the left to negative. Then you need to hook them up in sequence. For example, I started with connecting the positive battery terminal to the left lead on the first light, bottom row, second pin. Then from the right lead on the first light (top row, fourth pin) to the left lead of the third light (bottom row, first pin) and so on.

I'm not an electrician, so forgive me if I messed up my explanation

Am I the only one who has no idea what that means? I can do the first one since you say which spots to connect, but I have no idea what to do after that.

hint for the keypad:

Fibonacci sequence

[raydn1]

still need a solution for that orange puzzle...where must i slide what ?